top of page




Synthetic multifunctional direct contact fluid for food processing applications in the food manufacturing industry


Performance Features


• Registered for direct food contact

• Enhanced lubrication properties

• Good compatibility with common material

• Free from silicone

• Excellent creeping properties

• Easy and economic application

• Easy to remove and clean

• Neutral in odour and taste: does not turn rancid nor produces any bad smell

• Does not contain any MOH (mineral oil hydrocarbons) once the propellant is evaporated


Certifications and Specifications


• NSF H1

• NSF ISO 21469

• Kosher

• Halal




CASSIDA FLUID DCE 15 SPRAY is an easy to handle, multipurpose fluid designed for a number of special applications in the food manufacturing industry. The fluid has been specially developed to meet the stringent requirements of the food industry. It is based on a careful selection of synthetic fluids chosen for their ability to meet the stringent requirements of the food and beverage industry. Registered by NSF for use in both direct contact applications (Class 3H) and where there is potential for incidental food contact (Class H1). Produced according to FLT Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.




• Release agent used on grills, loaf pans, cutters, boning benches, chopping blocks or other hard surfaces to help prevent food from adhering during processing.

• Dough Divider lubrication

• Forming oil for the manufacture of both two and three piece cans for food and beverages (stamping, deep-drawing and bending).

• Stamping and deep drawing of aluminium foils for food-packaging. • Release agent for moulds in blister machines used for the deep-drawing of film (bottom film).

• Lubrication of lightly loaded chains.


Application Instructions


Any metal surfaces should be clean and dry before CASSIDA FLUID DCE 15 SPRAY is applied. Do not spray on hot surfaces, flames or any inflammable material and keep away from sources of ignition.


Seal and Paint Compatibility


Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems. Polyurethane based elastomers, leather, cork, asbestos paper and board should be avoided.


Handling and Storage


All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend to use the product within 3 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 3 years of date of manufacture, whichever is the sooner).

Nettbutikken er flyttet til Klikk på lenken eller be om tilbud her.

bottom of page